Determining Intensification Ratio Using Specifications...

Andy Routsis
Vote 0 Votes
I was asked this question during an on-site visit earlier this week...

Technician
I know this machine is rated with a maximum injection pressure of 38,000psi, but I am not sure how to convert this to an intensification ratio.

note: The intensification ratio is a factor which is used to convert the hydraulic pressure being applied to the hydraulic injection cylinders into the actual pressure being applied to the polymer melt at the front of the screw.
 
My Response
If you know the maximum plastic pressure (Pp-max) along with the maximum hydraulic pressure (Ph-max) for your machine, you can estimate the intensification ratio (Ri) for your machine. /  = 

Pp-max / Ph-max = Ri

 -Andy

Leave a comment

About this Entry

This page contains a single entry by Andy Routsis published on September 19, 2011 9:55 AM.

The Importance of Consistency... was the previous entry in this blog.

The Affect of Moisture on Injection Pressure... is the next entry in this blog.

Find recent content on the main index or look in the archives to find all content.